King Size Bed Frame Design Plans

Building a king-size bed frame is a great way to add a touch of personal style to your bedroom. It's also a relatively easy project that can be completed in a weekend. Here are some design plans to help you get started.

**Materials**

8 pieces of 2x6 lumber, each 8 feet long
4 pieces of 2x4 lumber, each 8 feet long
2 pieces of 1x6 lumber, each 8 feet long
1 piece of 1x4 lumber, 8 feet long
Wood screws
Wood glue
Sandpaper
Paint or stain (optional)

**Tools**

Circular saw
Drill
Sander
Measuring tape
Level
Clamps

**Instructions**

Cut the 2x6 lumber into the following lengths: 4 pieces at 76 inches long, 4 pieces at 36 inches long.
Cut the 2x4 lumber into the following lengths: 2 pieces at 76 inches long, 2 pieces at 30 inches long.
Cut the 1x6 lumber into the following lengths: 2 pieces at 76 inches long.
Cut the 1x4 lumber into the following lengths: 1 piece at 72 inches long.
Assemble the bed frame by attaching the 2x6 side rails to the 2x4 headboard and footboard using wood screws and wood glue. Make sure to use clamps to hold the pieces together while they dry.
Attach the 1x6 side rails to the inside of the 2x6 side rails using wood screws and wood glue.
Attach the 1x4 center support to the center of the bed frame using wood screws and wood glue.
Sand the bed frame smooth and paint or stain it as desired.

**Tips**

Use a level to make sure that the bed frame is level before attaching the side rails.
Use clamps to hold the pieces together while they dry to ensure a strong bond.
If you are using a power drill, be sure to use a drill bit that is the same size as the screws you are using.
If you are staining the bed frame, be sure to apply a clear finish coat to protect the stain.

**Variations**

There are many different ways to customize a king-size bed frame. Here are a few ideas: