Building A King Size Bed - Bed Sizes & Dimensions

Building a King-Size Bed

Building a king-size bed can be a rewarding experience, and it's not as difficult as you might think. With a little planning and the right tools, you can have a beautiful, custom-made bed that will last for years to come. Here's a step-by-step guide to help you get started:

Materials List

The building of a King-size bed will require the following list of materials:

8-inch (2x8) lumber for the bed frame
2x4 lumber for the bed slats
3/4-inch plywood for the bed platform
Wood screws
Sandpaper
Paint or stain (optional)

Step 1: Cut the Lumber

Begin by cutting the 2x8 lumber to the following lengths:

2 pieces at 80 inches (length of the bed)
4 pieces at 38.5 inches (width of the bed)

Next, cut the 2x4 lumber to the following lengths:

22 pieces at 72 inches (length of the slats)

Finally, cut the plywood to the following dimensions:

76 inches x 38.5 inches (width and length of the bed platform)

Step 2: Assemble the Bed Frame

To assemble the bed frame, place two of the 8-inch boards parallel to each other, with the ends flush. Attach the four 2x4 legs to the inside of each end piece, spacing them evenly apart. Secure the legs with wood screws. Repeat this process with the remaining two 8-inch boards to create the other side of the bed frame.

Step 3: Attach the Bed Slats

Place the bed slats across the bed frame, spacing them evenly apart. Attach the slats to the frame with wood screws. Make sure the slats are level and secure.